5 – Managing PortsGraphing Port Performance5-20 59097-00 A05.6.2Exiting SANsurfer Performance ViewerTo exit a SANsurfer Performance Viewer session, open the File menu and selectExit. The current fabric view is automatically saved to your default performanceview file upon exit, if you have defined an encryption key. The key is encryptedand saved with your default performance view file. A performance view filecontains the set of fabrics that have been added and the graphs that have beenopened during a SANsurfer Performance Viewer session. If you have not yetdefined an encryption key, the Save Default Performance View File dialog, shownin Figure 5-6, prompts you to save the current performance view file as the defaultperformance view file. Refer to ”Changing the Default Performance View FileEncryption Key” on page 5-22 for information about defining and changing thisencryption key.In the Save Default Performance View File dialog, enter an encryption key in theDefault Performance File Encryption Key field. Re-enter the encryption key in theRe-enter Encryption Key to Confirm field. Click the OK button to save the currentset of fabrics to the default performance view file in the working directory.To prevent SANsurfer Performance Viewer from prompting you to save the defaultperformance view file between sessions, set the Auto Load and Save GraphingEnvironment setting to Enable (default). Refer to ”Setting SANsurfer PerformanceViewer Preferences” on page 5-22 for more information.Figure 5-6. Save Default Performance View File Dialog
