A – Command Line InterfaceShow Command59097-00 A A-630 chassisDisplays chassis component status and temperature.config [option]Displays switch, port, and zoning configuration attributes. Refer to the ”ShowConfig Command” on page A-77.domainsDisplays list of each domain and its worldwide name in the fabric.donorDisplays list of current donor configuration for all ports.fabricDisplays list of each domain, symbolic name, worldwide name, node IP address,and port IP address.fdmi [port_wwn]Displays detailed information about the device host bus adapter given by[port_wwn]. If you omit [port_wwn], the command displays a summary of host busadapter information for all attached devices in the fabric. Illegal characters in thedisplay appear as question marks (?).interfaceDisplays the status of the active network interfaces.log [option]Displays log entries. Refer to the ”Show Log Command” on page A-81. The log iscleared when the switch is reset or power cycled.lsdbDisplays Link State database informationmem [count]Displays information about memory activity for the number of seconds given by[count]. If you omit [count], the value 1 is used. Displayed memory values are in1K block units.Note: This keyword will display memory activity updates until [count] isreached – it cannot be interrupted. Therefore, avoid using largevalues for [count].
