Qlogic SANbox 5602 User Manual

Also see for SANbox 5602: Supplementary guide Guidelines Installation Installation guide User guide

Contents

Qlogic SANbox 5602 User Manual Manual pdf 41 page image

2 – Using SANsurfer Switch ManagerSANsurfer Switch Manager User Interface59097-00 A 2-2502.10.3Fabric TreeThe fabric tree lists the managed fabrics and their switches as shown inFigure 2-9. The window width can be adjusted by clicking and dragging themoveable window border. An entry handle located to the left of an entry in the treeindicates that the entry can be expanded or collapsed. Click this handle ordouble-click the entry to expand or collapse a fabric tree entry. A fabric entryexpands to show its member switches.Figure 2-9. Fabric TreeEach fabric tree entry has a small icon next to it that uses color to indicateoperational status. A green icon indicates normal operation. A yellow icon indicates that a switch is operational, but may require attentionto maintain maximum performance. A red icon indicates a potential failure or non-operational state (if switch isoffline). A blue icon indicates that a switch is unknown, unreachable, orunmanageable.If the status of the fabric is not normal, the fabric icon in the fabric tree will indicatethe reason for the abnormal status. The same message is provided when you restthe mouse over the fabric icon in the fabric tree.SwitchEntriesMoveableWindow BorderEntry HandleFabricEntry