4 – Managing SwitchesRestoring the Factory Default Configuration4-30 59097-00 A0 Port Properties: Restores all settings presented in the Port propertiesdialog. Refer to ”Configuring Ports” on page 5-10. Configured Zoning: Restores all zone sets (except the active zoneset), zones, and aliases in the switch’s zoning database.5. If you select the Configured Zoning or Full Restore option and the filecontains zone sets, a dialog prompts you to activate one of those zone sets.Click the Yes button, and select a zone set from the drop-down menu in theSelect Zone Set to be Activated dialog.6. Click the OK button and view the results in the top pane of the Restoredialog.4.10Restoring the Factory Default ConfigurationYou can restore the switch and port configuration settings to the factory defaultvalues. To restore the factory configuration on a switch, open the Switch menuand select Restore Factory Defaults. Table 4-9 lists the factory default switchconfiguration settings.Restoring the switch to the factory default configuration does not restore theaccount name and password settings. The most current port license will remain ineffect. To restore user accounts, you must select the Reset Password File optionin the maintenance menu. Refer to “Recovering a Switch” in the Installation Guidefor your switch for information about maintenance mode and the maintenancemenu.Table 4-9. Factory Default Configuration SettingsSetting ValueSymbolic Name SANboxAdministrative State OnlineDomain ID 1Domain ID Lock FalseIn-band Management TrueBroadcast Support EnableResource Allocation Timeout (R_A_TOV) 10000 millisecondsInterop Mode TrueI/O Stream Guard DisabledDevice Scan Enabled TrueError Detect Timeout (E_D_TOV) 2000 milliseconds
