Qlogic SANbox 5602 User Manual

Also see for SANbox 5602: Supplementary guide Guidelines Installation Installation guide User guide

Contents

Qlogic SANbox 5602 User Manual Manual pdf 158 page image

A – Command Line InterfaceCommandsA-8 59097-00 A0The command set performs monitoring and configuration tasks. Commandsrelated to monitoring tasks are available to all account names. Commands relatedto configuration tasks are available only within an admin session. An accountmust have Admin authority to enter the Admin Start command, which opens anadmin session. Refer to the ”Admin Command” on page A-9.The commands and their page numbers are listed in Table A-2.Table A-2. Commands Listed by Authority LevelMonitoring Commands Configuration CommandHelpHistoryPingPsQuitShowShow ConfigShow LogShow PerfShow SetupUptimeWhoami(A-21)(A-22)(A-29)(A-30)(A-31)(A-62)(A-77)(A-81)(A-84)(A-87)(A-94)(A-98)Admin (A-9)Admin Session CommandsAlias 1Config1Create SupportDate 1Feature 1Firmware InstallHardresetHotresetImageLipPasswdResetSet1Set ConfigSet LogSet Port1Set SetupShutdownTestUser 1 2Zone 1Zoneset1Zoning11Some keywords do not require an Admin session.2 Some keywords can be executed only by the Admin account name.(A-10)(A-12)(A-15)(A-17)(A-18)(A-19)(A-20)(A-23)(A-24)(A-27)(A-28)(A-32)(A-37)(A-39)(A-52)(A-55)(A-57)(A-90)(A-91)(A-95)(A-99)(A-103)(A-105)