3 – Managing FabricsZoning a Fabric59097-00 A 3-2903.6.3.4Restoring the Zoning Database from a FileDo the following to restore the zoning database from a file to a switch:1. In the faceplate display, open the Zoning menu and select Edit Zoning toopen the Edit Zoning window.2. Open the File menu and select Open File. A popup window will prompt youto select an XML zoning database file.3. Select a file and click Open.3.6.3.5Restoring the Default Zoning DatabaseRestoring the default zoning clears the switch of all zoning definitions.To restore the default zoning for a switch:1. In the faceplate display, open the Zoning menu and select Restore DefaultZoning.2. Click the OK button to confirm that you want to restore default zoning andsave changes to the zoning database.3.6.3.6Removing All Zoning DefinitionsTo clear all zone and zone set definitions from the zoning database, choose one ofthe following: Open the Edit menu and select Clear Zoning. In the Removes All dialog,click the Yes button to confirm that you want to delete all zones and zonesets. Right-click the Zone Sets heading at the top of the Zone Sets tree, andselect Clear Zoning from the popup menu. Click the Yes button to confirmthat you want to delete all zone sets and zones.CAUTION! Restoring the zoning database from a file will replace the currentzoning database on the switch.CAUTION! This command will deactivate the active zone set.
