5 – Managing PortsGraphing Port Performance59097-00 A 5-210 In your next SANsurfer Performance Viewer session, the Load Default View Filedialog shown in Figure 5-7 prompts you to load the default performance view fileand to specify its encryption key, if there is one. In the Default Fabric FileEncryption Key field, enter the encryption key and click the Load View Filebutton. If you do not want to load the default performance view file, click theContinue Without Loading button to open the SANsurfer Performance Viewerwith no fabric displayed.Figure 5-7. Load Default View File Dialog5.6.3Saving and Opening Performance View FilesIn addition to the default performance view file, you can save and open your ownperformance view files. The performance view file contains the set of fabrics,graphs, and graphing options. To save a performance view file, do the following:1. Open the File menu and select Save View As to open the Save View dialog.2. Enter a name for the fabric file or click the Browse button to select anexisting file. Files are saved in the working directory.3. Enter a password. When you attempt to open this fabric file, you will beprompted for this password. If you leave the File Password field blank, nopassword is required.To open a performance view file, do the following:1. Open the File menu and select Open View File to open the Open Viewdialog.2. Enter a name for the fabric file or click the Browse button to select anexisting file.
