A – Command Line InterfaceShow Perf CommandA-84 59097-00 A0Show Perf CommandDisplays port performance in frames/second and bytes/second. If you omit thekeyword, the command displays data transmitted (out), data received (in), andtotal data transmitted and received in frames/second and bytes per second.Authority NoneSyntax show perfbyte [port_number]inbyte [port_number]outbyte [port_number]frame [port_number]inframe [port_number]outframe [port_number]errors [port_number]Keywords byte [port_number]Displays continuous performance data in total bytes/second transmitted andreceived for the port group (0–15 or 16–19) that includes [port_number]. If youomit [port_number], ports 0–15 are displayed. Type “q” and press the Enter key tostop the display.inbyte [port_number]Displays continuous performance data in bytes/second received for the port group(0–15 or 16–19) that includes [port_number]. If you omit [port_number], ports0–15 are displayed. Type “q” and press the Enter key to stop the display.outbyte [port_number]Displays continuous performance data in bytes/second transmitted for the set of16 ports (0–15 or 16–19) that includes [port_number]. If you omit [port_number],ports 0–15 are displayed. Type “q” and press the Enter key to stop the display.frame [port_number]Displays continuous performance data in total frames/second transmitted andreceived for the set of 16 ports (0–15 or 16–19) that includes [port_number]. If youomit [port_number], ports 0–15 are displayed. Type “q” and press the Enter key tostop the display.inframe [port_number]Displays continuous performance data in frames/second received for the portgroup (0–15 or 16–19) that includes [port_number]. If you omit [port_number],ports 0–15 are displayed. Type “q” and press the Enter key to stop the display.outframe [port_number]Displays continuous performance data in frames/second transmitted for the portgroup (0–15 or 16–19) that includes [port_number]. If you omit [port_number],ports 0–15 are displayed. Type “q” and press the Enter key to stop the display.
