Panasonic TH-55SF1HU Operating Instructions Manual

Also see for TH-42SF1HU: Operating instructions

Contents

Panasonic TH-55SF1HU Operating Instructions Manual Manual pdf 97 page image

97EnglishRewriting theInternal LightIDUsing the USB memory device, the LightID written in theLightID-distribution file can be updated as the InternalLightID of the display.■ Supported device● Commercially available USB memory devices aresupported. (Those with security functions are notsupported. Operation is not guaranteed.)● USB memory devices other than those formatted inFAT16 or FAT32 cannot be used.● Up to 32 GB of USB memory in size are supported.● Only single partition configuration is supported.Note● Only one Internal LightID can be written.● Save only the LightID-distribution file in the USBmemory device. If multiple files have been saved, theInternal LightID may not be updated.● If multiple LightIDs have been written in the LightID-distribution file, the first LightID in the file is written asthe Internal LightID.The first written LightID can be confirmed on the Webmenu from which the LightID was obtained, or on the“Multi Monitoring & Control Software” (see page 76).● If multiple LightIDs have been written in the LightID-distribution file, using the “Multi Monitoring & ControlSoftware” (see page 76) can select the desired IDand update it.● To restore the Internal LightID to the default state, see“Shipping condition” (see page 94).● How to obtain the LightID-distribution file(see page 51)● If the file name contains characters other than one-byte alphabetic character, this function may not workproperly.If it does not work, change the file name to that in theform of [****.bin] (****: one-byte alphanumeric).● The password input screen disappears if no operationis performed for the period set for [Menu displayduration]. (see page 59)If the menu disappears, perform the operation againfrom step 2.1 Copy the LightID distribution file tothe USB memory device.2 Insert the USB memory device to theUSB terminal on the bottom of thedisplay.A menu to confirm that the rewrite of the InternalLightID starts is displayed.3 To update the Internal LightID, select[YES] with , and press .Are you sure you want to upgrade the Internal LightID?Please enter the password in the next menu.YES NO4 Enter the password given whenobtaining the LightID-distribution file,select [Ok] and press . (seepage 91)A menu to confirm if the write is performed isdisplayed.12345678█01 2 3 4 5 6 7 8 9aa/A/@b c d e f g h i jk l m n o p q r s tu v w x y z – _.OkCancelAll deleteDelete5 Check if the Management ID displayedon the menu is for the write.The Management ID is the management numberassigned when the LightID is distributed.6 To rewrite the Internal LightID, select[YES] with , and press .You will not be able to use any of the Display's features while the upgrade isbeing performed. Once started, the upgrade process cannot be canceled. Areyou sure you want to upgrade the Internal LightID?Management ID : VSBD00000005650000000001YES NO7 When the write of the Internal LightIDis complete, remove the USB memorydevice from the USB terminal.Internal LightID upgrades successful!Please remove the USB device.