EXtra Device Port (XDP):A Super Hybrid port can be used as an XDP port, allowing two telephones (a DPT and an SLT) to be connectedto the same port of the PBX. This XDP port can be used in one of the following modes:Mode DescriptionParallel Mode The DPT and an SLT share the same extension number so thatthey can act as one extension. The SLT uses the extension data(extension number, Class of Service [COS], etc.) of the DPT. (®13.1.2 Paralleled Telephone)XDP Mode The DPT and SLT have different extension numbers and act asindependent extensions. To use XDP mode, XDP mode must beenabled for the port through system programming. (®13.1.2 Paralleled Telephone)Conditions• Automatic Detection on Super Hybrid PortA DPT, SLT, or PT-interface CS connected to a Super Hybrid port can be detected automatically withoutany programming. An APT connected to a Super Hybrid port can be detected automatically when XDPmode has been disabled.• A DSS Console or a Panasonic VPS which supports DPT (Digital) Integration can also be connected withan SLT in XDP mode.• APT and SLT in Parallel ModeAn APT and an SLT can also be connected to a Super Hybrid port and used in parallel mode.• Digital XDPA DPT can be connected to another DPT and act as an independent extension with its own extensionnumber. (® 13.1.2 Paralleled Telephone)• Wireless XDP Parallel ModeA PS can be used in Wireless XDP Parallel mode with a wired telephone.(® 20.1.5 Wireless XDP Parallel Mode)• DSS Console and Paired Telephone AssignmentWhen a DSS Console is connected, a PT must be paired with the DSS Console through systemprogramming.PC Programming Manual References3.24 [1-1] Slot—Port Property - Extension Port6.17 [4-3] DSS Console— Pair ExtensionPT Programming Manual References[007] DSS Console Paired Telephone[600] EXtra Device Port (XDP) Mode5.1.8 External RelayDescriptionBy turning external device relays on and off, the PBX can control external devices such as alarms.96 Feature Manual Document Version 2009-125.1.8 External Relay
