1.1.5 Automatic Extension ReleaseDescriptionAfter going off-hook, if an extension user fails to dial any digits within a preprogrammed time period, the userwill hear a reorder tone. This operation applies to intercom calls only.This feature is also known as Automatic Station Release.Conditions• A proprietary telephone (PT)/portable station (PS) user hears a reorder tone for a preprogrammed timeperiod, and then the PT/PS returns to idle status automatically. A single line telephone (SLT) user will heara reorder tone until he or she goes on-hook.• This feature works in one of the following cases:When making an intercom calla. The first digit is not dialed within a preprogrammed time period.b. A digit is dialed, but subsequent digits are not dialed within a preprogrammed time period.PC Programming Manual References4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone→ Dial—Extension First Digit→ Dial—Extension Inter-digit→ Tone Length—Reorder Tone for PT Handset→ Tone Length—Reorder Tone for PT Hands-free1.1.6 Automatic Time AdjustmentDescriptionThe PBX clock can be adjusted automatically in the following two ways:1. Daylight Saving Time SettingThe start and end dates of Daylight Saving Time can be programmed. The PBX clock will automaticallyadjust itself one hour forward or backward at 2:00 A.M. on the programmed date, if enabled through systemprogramming. At 2:00 A.M. on the start date, the clock will change to 3:00 A.M., and at 2:00 A.M. on theend date, the clock will change to 1:00 A.M.NoteIf a Timed Reminder (Remote Wake-up call) is set:– On the Daylight Saving Time start date, a reminder set for between 2:00 A.M. and 3:00 A.M. willnot ring.– On the Daylight Saving Time end date, a reminder set for between 1:00 A.M. and 2:00 A.M. willring twice.2. Time Information from Telephone CompanyTime information can be received when– An incoming or outgoing call through an ISDN line is received/made.– An incoming call through an analog line with Caller ID which includes time information is received.The PBX clock will be adjusted everyday with the first call after 3:05 AM, if enabled through systemprogramming.Document Version 2009-12 Feature Manual 231.1.6 Automatic Time Adjustment
