9.1.11 Intercept Routing9.1.12 Intercept Routing—No DestinationOperating Manual References1.3.18 DISA (Direct Inward System Access)1.3.73 Walking COS4.1.9 Display InformationDescriptionA display proprietary telephone (PT) can relay the following information to the user while making or receivingcalls:Display Item Display Example ConditionThe extension number and name of thecalling or called extension, or Incoming CallDistribution (ICD) Group123: Tom Smith –Status of the called extension 123: Busy –The number and name of the optional device D02: 1st Door –The telephone number dialed 1234567890 –The received call informationa. Caller’s nameb. Caller’s numberc. CO line number/named. Original Destination, if the call isforwardede. DID nameABC Company12345678Line 001: Sales®102:MikePanasonic*The first line message canbe either (a), (c), or (e) ateach extension throughsystem programming.These can be displayed inturn by pressing theTRANSFER button orDISP Soft button.Duration of the current CO line call Line 001 11:02’28 –Conditions• Multilingual DisplayEach extension can select its display language through personal programming (Display LanguageSelection).• Display ContrastThe display contrast can be adjusted through personal programming (Display Contrast Selection). This isavailable only for digital proprietary telephones (DPTs) and IP proprietary telephones (IP-PTs).• Display BacklightSome extensions can select whether to turn the display backlight on or off through personal programming(Display Backlight Selection). For details, refer to the manual for your telephone.• Characters (name) or digits (number) exceeding the display’s limitations are not displayed. Although in thiscase information may not be displayed properly, the received information is not altered.84 Feature Manual Document Version 2009-124.1.9 Display Information
