[Programming Example of Ring Tone Pattern Table]TableNo.IntercomCall/HoldRecallCO Line Call/HoldRecall Doorphone Call TimedReminderCallBack LCS ExternalSensorTRG1 TRG2 ... Port 1 Port2 ...1 Double Single Single2 Single Double Double: : : : : : : : : : : :Conditions• "PT Ring Off Setting" can be enabled or disabled through system programming. If disabled, PT userscannot turn incoming call ringing off for their extension.• For the S-CO, G-CO, L-CO, ICD Group, INTERCOM, PDN and SDN buttons, one of 30 ring tones can beassigned through personal programming.PC Programming Manual References4.15 [2-8-1] Ring Tone Patterns—Call from CO— Ring Tone Pattern Plan 1–84.16 [2-8-2] Ring Tone Patterns—Call from Doorphone— Ring Tone Pattern Plan 1–84.17 [2-8-3] Ring Tone Patterns—Call from Others— Extension—Ring Tone Pattern Plan 1–84.18 [2-9] System Options—Option 1— PT Operation—PT Ring Off Setting6.1 [4-1-1] Wired Extension—Extension Settings→Option 1— Ring Pattern Table→Option 6— ICM Tone6.5 [4-1-4] Wired Extension—Flexible Button— Optional Parameter (Ringing Tone Type Number) (for LoopCO, Single CO, Group CO, G-DN, SDN)6.10 [4-2-1] Portable Station—Extension Settings—Option 1— Ring Pattern Table6.17 [4-3] DSS Console— Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO, GroupCO, G-DN, SDN)Feature Manual References21.1 Capacity of System ResourcesOperating Manual References3.1.4 Customizing the Buttons15.1.3 Room Status ControlDescriptionA proprietary telephone (PT) with a 6-line display designated as the hotel operator extension can be used toview and set the Check-in/Check-out/Cleaned-up (Ready or Not Ready) status of guest rooms associated withextensions.Any wired extension can be used as a room extension without special programming.Flexible buttons on the hotel operator’s extension can be set as Room Status Control buttons. The 3 types ofRoom Status Control buttons are as follows:286 Feature Manual Document Version 2009-1215.1.3 Room Status Control
