Feature Manual References10.1.4 Local Alarm Information16.1.5 Special Carrier Access CodeDescriptionIf the PBX has access to multiple telephone companies, a Special Carrier Access code assigned throughsystem programming is required every time a CO line call is made without using ARS.A pause of a preprogrammed length will be automatically inserted between the user-dialed Special CarrierAccess code and the subsequent digits. (® 13.1.4 Pause Insertion)Conditions• TRSToll Restriction (TRS) checks only the dialed telephone number excluding the Special Carrier Access code.(® 17.1.6 TRS (Toll Restriction))• ARSA pause is not automatically inserted between the user-dialed access code and the subsequent digits whenARS mode is enabled. (® 1.1.3 ARS (Automatic Route Selection))• If this PBX is installed behind an existing host PBX:A Special Carrier Access code and a Host PBX Access code should be assigned separately—these codescannot be assigned together as one code. (® 8.1.5 Host PBX Access Code (Access Code to theTelephone Company from a Host PBX))PC Programming Manual References9.3 [7-3] Special CarrierPT Programming Manual References[303] Special Carrier Access CodeFeature Manual References1.1.3 ARS (Automatic Route Selection)21.1 Capacity of System Resources16.1.6 Speed Dialing, PersonalDescriptionAn extension user can make calls using abbreviated dialing for frequently dialed numbers which are stored inthe extension’s Personal Speed Dialing.Personal Speed Dialing is also known as Station Speed Dialing.302 Feature Manual Document Version 2009-1216.1.6 Speed Dialing, Personal
