Input Displayed whileEntering DescriptionTRANSFER (Transfer)*1 T Store a transfer command by pressingthe TRANSFER button at the beginningof the number (used only for One-touchDialing). (® 3.1.10 Call Transfer)[Example] Storing "T + 305"=Transferring a call to extension 305.*1 Available only when in the system/personal programming mode[Secret Dialing Example]When storing the number "9-123-456-7890", to conceal the telephone number "123-456-7890",Enter .INTERCOM9 1 2 3 4 5 6 7 8 9 0 INTERCOMNote• It is possible to store a Memory Dialing feature number at the beginning of Memory Dialingnumbers.• It is possible to store several feature numbers in one Memory Dialing location.Conditions• CO Line Access by Memory DialingA specific CO Line Access number can be stored along with the telephone number in Memory Dialing.However, if Memory Dialing is done after selecting a CO line, the stored CO Line Access number is ignoredand the telephone number is sent using the selected CO line.11.1.3 Message WaitingDescriptionWhen an extension user calls another extension that does not or cannot answer the call, he or she can leavea Message Waiting notification. The appropriate button or lamp on the called extension user’s telephone willlight, indicating that a call was missed or a message recorded by the Voice Processing System (VPS) or theSimplified Voice Message (SVM) feature is waiting. A Message button can be used to call the caller back orlisten to the message.When a message is left for a proprietary telephone (PT), the Message button on it lights or the Message/RingerLamp turns red. Pressing the lit Message button while on-hook shows the caller’s information as shown below:Document Version 2009-12 Feature Manual 18511.1.3 Message Waiting
