Honeywell 6272CV User Manual

Contents

Honeywell 6272CV User Manual Manual pdf 54 page image

Setup (Cont'd)54Note that this is a limited mode of operation. While in this mode:• You can use the Security button to access the Console EmulationMode of operation to try to clear your faults, disarm the system, orenter additional Alpha Keypad commands specified in your panelUser Guide. You can perform almost all functions that you canperform from a standard non-graphic alpha keypad.• You can press the “Panic” key and generate Emergency Messagesas defined in the panel's home partition for this TouchCenter.• The Armed and Ready LEDs on the front of the TouchCenter willindicate the TouchCenter’s home partition status. The Message (onmodels with Voice feature ) or Trouble (on models without Voicefeature) LED is not active in the Safe Mode.• The Chime mode will function in the Safe Mode.• When an alarm occurs in the Safe Mode, it is displayed on theConsole mode screen only and will not be shown on the HomescreenTo Exit the Safe Mode:1. Press the ! SAFE MODE ! bar. You will be presented with thefollowing popup message:2. Select “Yes” to return to the Normal Mode of operation. TheTouchCenter will reset and normal operation will return as long asthe original conditions that caused the entry into Safe Mode do notstill exist.Time/Date SetupYou can set the time and date from the Set Time & Date screen.• When the time is set it will be stored in the TouchCenter and sentto the control panel when you press the Apply button and answer