Honeywell 6272CV User Manual

Contents

Honeywell 6272CV User Manual Manual pdf 24 page image

Security (Cont'd)24SCREEN ACTION3. Press the DISARM ALL button if youwish to disarm the system. TheTouchCenter beeps once and the "Arming"screen is displayed showing the system asReady to Arm or not ready if any zone isfaulted (open).Note: If you wish to disarm only selectedpartitions, you must first highlight thepartition(s) to be disarmed, then press theDISARM SELECTED button. TheTouchCenter beeps once and the "Arming"screen is displayed showing the system asReady to Arm or not ready if any zone isfaulted (open).Note: Once the system is disarmed, theTouchCenter will return to the "Home"screen after the selected “To Home PageAfter” time has expired. This time isselected on the “Setup” screen.How to Check the Status of Other PartitionsThis system supports between one and eight Partitions (depending onthe system.) Partitioning enables a single physical alarm system tocontrol up to eight areas of protection (partitions) depending on thesystem you have purchased. Each TouchCenter and other keypad isassigned a default partition for display purposes, and will show onlythat partition's information.Note: A letter “H” following the partition name or number indicatesthat this is the default partition for the TouchCenter.For example, if your physical site is a four-apartment housing unit,your alarm system may be configured with four partitions. Eachapartment’s zones (door, windows, smoke detectors, etc.) are assignedto separate partitions, giving each apartment independentarming/disarming control of its own partition (area). A landlord ormanager may be granted access to all partitions, so he/she can controlthe entire system.If a user is so authorized, a TouchCenter or other keypad in onepartition can be used to perform system functions in another