Honeywell 6272CV User Manual

Contents

Honeywell 6272CV User Manual Manual pdf 10 page image

About the TouchCenter (cont'd)10ITEM FUNCTIONArm Multi-PartitionsPress this button when you want to arm more than one partition. Allpartitions within the system can be armed at one time (if the user is soauthorized). Note: This option may not be shown for some single partitionsystems.MORECHOICESPress this button for more Security, Lighting, and TouchCenter setupfeatures.System TroublesThe “Arming” screen also displays an Icon(s) if a system trouble(s)occurs. The system trouble Icon is displayed to the left of the Panicbutton. If a trouble Icon is shown, contact your alarm company. Thefollowing Icons may be shown as applicable to your system:ICON MEANINGAC Loss – The system is not receiving AC power.Bell Failure – The system bell or siren has a problem. Note: This Icon will bedisplayed when interfacing with residential panels only.Expander Failure – The system has a failure in an expansion module.Low Battery – The system battery, that powers the system during an ACpower loss, is low.LRR Supervision Failure – The Long Range Radio used to communicate withthe central station has a supervision failureMax Attempts Exceeded – The system has exceeded the maximum attemptsto communicate with the Central Station.Pager Failure – The system cannot communicate with an assigned pager.Telco-1 Cut – The system is not able to communicate with the centralmonitoring station over the primary phone line.Telco-2 Cut – The system is not able to communicate with the centralmonitoring station over the secondary phone line.Note: Fault Icon(s) will scroll between all faults present on the system, if multiple faultsexist.