Honeywell 6272CV User Manual

Contents

Honeywell 6272CV User Manual Manual pdf 14 page image

14SecurityIntroduction to Security System OperationYou can arm your system in one of three arming modes: Away, Stay,and Night. The following table lists the three different arming modesand the results of each.FEATURES FOR EACH ARMING MODEArmingModeExitDelayEntryDelayPerimeterArmedInteriorArmedAway Yes Yes Yes YesStay Yes Yes Yes NoNight* Yes Yes (set for Away orStay Mode)No (set for Instant orMaximum Mode)Yes Yes (set for Awayor MaximumMode)No (set for Stay orInstant Mode)*Your installer may have configured Night Mode differently; haveyour installer write the actual zone settings above.How to Arm the SystemArming the system in any mode is performed in the same way, asdescribed below.Note: Close all perimeter windows and doors before arming.1. From the "Home" screen, press the SECURITY button. The "Arming" screenis displayed.SCREEN ACTION2. On the "Arming" screen, press theselected arming button.Note: If Quick Arm is Not enabled in yoursystem, you will receive a message toenter your User Code.