Chapter 2. CPU Features & SpecificationsGFK-2222AD April 2018 49Configure a Network ProxyA Network Proxy is only required when your network architecture is configured to restrict access directlyto the Internet. Contact your network administrator for the Network Proxy information.If a network HTTP/HTTPS proxy server is used to route traffic from the intranet to the Internet, thenetwork proxy must be configured in the Web Console under Technician Console, Network Configuration.To add or update a network proxy server, check the “Enable HTTP/HTTPS Proxy” check box, enter theproxy server’s address and port in the form “proxy:port” into the Proxy Settings text box, and press theSave button.Figure 10: Enter Proxy Server AddressTo verify the Field Agent can successfully use the newly configured network proxy to reach the Internet,use the Test Connection feature of the Field Agent Updater page in the Web Console under TechnicianConsole, Field Agent Updater. Internet reachability can be tested by using either the default Update URLor any other desired URL and pressing the Test Connection button.Figure 11: Test ConnectionIf the URL is reachable, a Test Connection Succeeded message is displayed below the Test Connectionbutton after the button is pressed. Otherwise, a message will appear indicating that the Test Connectionattempt failed.