GE PACSystems RX7i Reference Manual

Also see for PACSystems RSTi-EP: User manual CPU Programmer's Reference Manual

Contents

GE PACSystems RX7i Reference Manual Manual pdf 126 page image

Chapter 3. CPU ConfigurationGFK-2222AD April 2018 1153.2.3 SNTPThis tab displays the Simple Network Time Protocol configuration settings when SNTP is active.SNTP Mode SNTP Mode of operation. Specify the use of Multicast/Broadcast or Unicast settings tocommunicate to the time server.Choices: Multicast/Broadcast or Unicast.Default: Multicast/Broadcast.Poll Interval Interval, in seconds, at which new time requests are sent to the server. Only available whenSNTP Mode is set to Unicast.Valid Range: 16 to 1024, even values only.Default: 32.Primary IPAddressIP address of the primary time server in dotted decimal format.Valid Range: Any valid unicast IPv4 address.Default: 0.0.0.0.Secondary IPAddressOptional IP address of the secondary time server in dotted decimal format.Valid Range: Any valid unicast IPv4 address or 0.0.0.0 if unused.Default: 0.0.0.0.Poll Count Number of retransmissions that will be sent when no timely response is received from theserver.Valid Range: 1 to 100.Default: 3.Poll Timeout The time, in seconds, to wait for a response from the server.Valid Range: 1 to 100.Default: 2.