Chapter 2. CPU Features & SpecificationsGFK-2222AD April 2018 1012.4.1 CPE100/CPE115IntroductionThe EPSCPE100 and EPSCPE115 are the first standalone CPUs in the RSTi-EP family. Each is supportedby two mounting options:1) As shipped, it mounts onto a DIN rail using a DIN-rail adaptor plate.2) Alternately, it mounts directly in a cabinet, using a panel-mount adaptor plate ICMFAACC001-AA.The mounting instructions and power requirements are documented in the Quick Start Guide, GFK-3012,and are not replicated here.The physical features of the CPE100/CPE115 are shown in the Figure 31Top ViewBottom ViewFront ViewFigure 31: CPE100/CPE115 Front, Top and Bottom Views and FeaturesThe PACSystems* RSTi-EP EPSCPE100/CPE115 are enhanced performance standalone programmablecontrollers equipped with 1MB(CPE100)/1.5MB(CPE115) of user memory and four Ethernet ports to runreal time deterministic control applications. LAN1 is dedicated to high speed Ethernet and LAN2 iscomprised of 3 switched ports configurable as either a second embedded Ethernet controller or anembedded PROFINET controller, which provides the PROFINET functionality and supports only simplexmode of operation. It is a standalone PLC that supports distributed I/O.
