Messages regarding HP-GL/2This type of paper is not compatible with HP-GL/2. ....................................................................................... 831GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) ...................................................................... 831GL2: W0502 The parameter is out of range. ................................................................................................... 831GL2: W0504 This command is not supported. ............................................................................................... 831This type of paper is not compatible with HP-GL/2.Cause Corrective ActionThe printer has received a HP-GL/2print job that cannot be printed on thepaper that has been advanced.Follow these steps to replace the type of paper in the printer.1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.2. Replace the paper with a type compatible with HP-GL/2. For details on pa-per compatible with HP-GL/2, refer to the Paper Reference Guide. (See"Types of Paper.") →P.568Press ▲ or ▼ to select Print, and then press the OK button to resume print-ing. However, note that this error may cause paper jams and affect the print-ing quality.GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)Cause Corrective ActionThe printer memory isfull.Because the entire print job could not be received, the printer may not be able to print theentire original. Check the printing results.GL2: W0502 The parameter is out of range.Cause Corrective ActionA parameter specified in a HP-GL/2 command is out of thesupported range.Check the print job.If you have specified ProcessingOption > Warning> On in the Control Panel menu, set it to Off in-stead.GL2: W0504 This command is not supported.Cause Corrective ActionThe printer has received an unsupported HP-GL/2 com-mand.Check the print job.If you have specified ProcessingOption > Warning > Onin the Control Panel menu, set it to Off instead.Error Message > Messages regarding HP-GL/2 >iPF650 This type of paper is not compatible with HP-GL/2.12831
