8. Press ▲ or ▼ to select the communication mode, and then press the OK button.The display reverts to the Ethernet Driver menu.9. Press ▲ or ▼ to select Ethernet Type, and then press the OK button.10. Press ▲ or ▼ to select the Ethernet type, and then press the OK button.The display reverts to the Ethernet Driver menu.11. Press ▲ or ▼ to select Spanning Tree, and then press the OK button.12. Press ▲ or ▼ to enable or disable spanning tree support, and then press the OK button.The display reverts to the Ethernet Driver menu.13. Press the Menu button.After the confirmation message is displayed, press the OK button.The new settings will take effect after the printer restarts.Email Notification When Printing is Finished or Errors OccurThe printer can notify you of the printer status by email. Even when you are away from the printer, you can know whenprinting is finished or if errors occur. Receive notification via email on your mobile phone or at your computer.Use the imagePROGRAF Status Monitor (Windows) function to set up email recipients and message timing. Besides beinginformed of finished print jobs or errors, you can also complete settings for email notification when service is needed or it'stime to replace consumables. For detailed instructions,see "Specifying Printer-Related Information." →P.727Network Setting > Other Settings >iPF650 Email Notification When Printing is Finished or Errors Occur9729
