Messages regarding printing or adjustmentCannot adjust paper feed. .............................................................................................................................. 826Check printed document. ............................................................................................................................... 826Cannot adjust paper feed.Cause Corrective ActionThe Printhead nozzles are clogged. Execute Adj. Quality again, as follows.1. Press the OK button to clear the error.2. Print a test pattern to check the nozzles.(See "Checking for Nozzle Clogging.") →P.7403. Clean the Printhead if the nozzles are clogged.(See "Cleaning the Printhead.") →P.7414. Execute Adj. Quality again.(See "Automatic Banding Adjustment (Adj. Quality).") →P.630Highly transparent film is loadedthat cannot be used for automaticfeed amount adjustment.Press the OK button to clear the error, and then adjust the feed amount manually.(See "Manual Banding Adjustment (Adj. Quality).") →P.631Check printed document.Cause Corrective ActionThe Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.(See "Cleaning the Printhead.") →P.741Error Message > Messages regarding printing or adjustment >Cannot adjust paper feed. iPF65012826