11. Press the Menu button.If any of the settings is changed, a confirmation message is displayed. In this case, press the OK button.Important• Be sure to complete step 11. This will activate the values you have entered.Note• If an error message is displayed, check the settings and correct any invalid values.• To cancel this process, press the Stop button.Specifying NetWare Print ServicesBefore printing in a NetWare network, you must configure print services such as print servers, print queues, and so on. Youcan configure the print service settings from a computer using any of the following Novell software provided with NetWare.• NWADMIN• PCONSOLEImportant• If you use NWADMIN to configure the print service settings, Novell Client (the Novell NetWare client soft-ware) must be installed as the client software application.• NetWare networking is unsupported in Windows Vista, Windows Server 2008 and Windows 7.This topic gives instructions for configuring NetWare print services. The order of this procedure may vary depending on theenvironment.Choosing the type of print servicesBefore completing print service settings, choose the type of print service. Refer to the following descriptions as needed.Note• In NetWare 5.1 or 6.0, NDPS may also be used as the print service. If you use NDPS, use the Novell printergateway included with NetWare. For details on configuring NDPS, refer to the NetWare documentation.• NDS (Novell Directory Service) and binderyNDS and bindery are both supported. Use the mode that is compatible with your network environment.• Queue server mode and remote printer modeQueue server mode and remote printer mode are both supported.• Queue server modeNetwork Setting > NetWare Settings >Specifying NetWare Print Services iPF6509714
