"Replace roll with 10 in. wide or larger roll."Cause Corrective ActionThe loaded paper is too small. Replace the roll with a roll 10 inches in width or larger as follows.1. Press ▲ or ▼ to select Change Paper, and then press the OK button.(See "Removing the Roll from the Printer.") →P.585(See "Removing the Roll Holder from Rolls.") →P.5892. Replace the roll with a roll 10 inches wide or larger.(See "Attaching the Roll Holder to Rolls.") →P.575(See "Loading Rolls in the Printer.") →P.579The printer will resume printing.Press ▲ or ▼ to select Stop Printing, and then press the OK button."Remove paper and check pap. size"Cause Corrective ActionA sheet has come out of the printer during print-ing.1. Press the Release Lever back and remove the paper.2. Reload the sheet, aligning it with the guide on the right.3. Pull the Release Lever forward.4. If "Not finished printing. Finish printing remaining jobs?" isshown on the Display Screen, press the OK button.Printing will resume, starting from the page on which the erroroccurred.(See "Loading Sheets in the Printer.") →P.602PaprWidth MismatchCause Corrective ActionWhen Detect Mismatch in the Control Panel menuis set to Pause or Warning, the width of the loa-ded roll does not match the width specified in FitRoll Paper Width in the printer driver.Press ▲ or ▼ to select Print, and then press the OK button toresume printing.However, note that this error may cause paper jams and affectthe printing quality.Press ▲ or ▼ to select Stop Printing, and then press the OKbutton.Follow these steps to replace the roll to match the width speci-fied in the printer driver.1. Press ▲ or ▼ to select Change Paper, and then press theOK button.(See "Removing the Roll from the Printer.") →P.585(See "Removing the Roll Holder from Rolls.") →P.5892. Replace the paper with paper compatible for borderless print-ing.(See "Attaching the Roll Holder to Rolls.") →P.575(See "Loading Rolls in the Printer.") →P.579The printer now starts printing the print job.Error Message > Messages regarding paper >PaprWidth Mismatch iPF65012814
