Output StackerUsing the Output Stacker ................................................................................................................................ 611Using the Output StackerThis section describes how to use the Output Stacker.Note• The Stand that can be used with this printer is Printer Stand ST-27 and Printer Stand ST-26.• The Stand is described in the illustration of Printer Stand ST-27. Note that the illustrations may look differentfrom the appearance of your printer in some cases.• When storing printed documents on the Output StackerUse position (1). For details on how to use the Extended position which is a useful function for retrieving printed mat-ter, refer to the note regarding the Extended position. (See "Note regarding the extended position.") →P.612• When the Output Stacker is not used, when loading paper, or when moving the printerUse position (2).When moving the printer, always lift the Support Rod to Extended position A before putting it in position (2), other-wise the Basket Cloth may touch the floor and be soiled or damaged. (See "Switching to Extended position A.")→P.612Important• When storing printed documents on the Output Stacker, always use it in position (1). If you do not, printeddocuments may not be dropped into the Output Stacker, and the printed surface may become soiled.• The Output Stacker can hold one sheet. When printing multiple pages, remove each sheet after it is printed.Handling Paper > Output Stacker >iPF650 Using the Output Stacker5611
