Print Target DescriptionCAD (Monochrome LineDrawing )Settings optimized to print black lines in CAD drawingsclearly.Perspective, GIS Settings optimized for printing 3D CAD drawings, perspec-tive drawings, and maps, including GIS maps.Note• You can check the settings values for each print target by clicking View Settings.• You can also fine-tune these values as needed. ( Advanced Settings)For details on Advanced Settings, see "Giving Priority to Particular Graphic Elements and Colors forPrinting →P.60 "• Print QualityChoose the print quality.The printing mode is determined by a combination of the print quality and resolution.Print Quality DescriptionHighest A setting for printing at the highest resolution when quality is most important. Print-ing takes longer and consumes more ink than in other modes, but this mode offerssuperior printing quality.High Choose this setting to print at high resolution when quality is most important.Printing takes longer and consumes more ink than in Standard or Draft modes, butthis mode offers exceptional printing quality.Standard Choose this setting to print at standard resolution when quality and speed are bothimportant.Printing takes less time than in Highest or High mode.Draft Choose this setting to print faster.Printing in draft mode can help you work more efficiently when checking layouts.For instructions on printing line drawings and text, refer to the following topics, as appropriate for your computer andoperating system.• Printing Line Drawings and Text (Windows) →P.40• Printing Line Drawings and Text (Mac OS X) →P.42Printing Line Drawings and Text (Windows)This topic describes how to print line drawings based on the following example.• Document: CAD drawing• Page size: A3 (297.0 × 420.0 mm [11.7 × 16.5 in])• Paper: Roll paper• Paper type: Plain Paper• Roll paper width: A2/A3 roll (420.0 mm [16.5 in])Enhanced Printing Options > Printing CAD Drawings >Printing Line Drawings and Text (Windows) iPF650240
