3. If a password has been set on the printer, enter the password.4. Click Network in the Device Manager menu at left to display the Network page.5. Click Edit in the upper-right corner of the TCP/IPv4 group to display the Edit TCP/IP Protocol Settings page.6. Refer to the TCP/IP Settings Items table to complete the settings.TCP/IP Settings ItemsItem Details Default SettingUse DHCP Activate this setting to use DHCP for configuring the IP address. OffUse BOOTP Activate this setting to use BOOTP for configuring the IP address. OffUse RARP Activate this setting to use RARP for configuring the IP address. OffEnable DNS Dy-namic UpdateActivate this setting to perform DNS server registration automati-cally.OffUse Zeroconf Func-tionActivate this setting to use Bonjour. OnIP Address Specify the printer's IP address. 0.0.0.0Subnet Mask Specify the printer's subnet mask. 0.0.0.0Gateway Address Specify the printer's default gateway. 0.0.0.0LPD Printing Activate this setting to use LDP Printing. OnIPP Printing Activate this setting to use IPP Printing. OnIPP Printer URI Specify the URI of the printer used for IPP printing using up to252 characters.printerRAW Printing Activate this setting to use Raw Printing. OnRAW Mode Bi-di-rectionActivate this setting to use Raw mode bidirectional communica-tion.OffFTP Printing Activate this setting to use FTP Printing. OnUse Discovery Activate this setting to use SLP Discovery function. OnScope Enter the SLP search range. defaultSMTP Server Ad-dressSpecify the SMTP server's IP address.You can also specify the SMTP server domain name, if desired.0.0.0.0Primary DNS Serv-er AddressSpecify the IP address of the primary DNS server. 0.0.0.0Secondary DNSServer AddressSpecify the IP address of the secondary DNS server. 0.0.0.0DNS Host Name Specify the printer host name, up to 63 characters (1–63 charac-ters). Use single-byte letters, numbers, and - (hyphens). Do not usenumbers or - for the first character or - for the last character.NB-18GBipxxxxxxDNS Domain Name Specify the printer domain name, up to 63 characters. Use single-byte letters, numbers, - (hyphens), and . (periods). Do not usenumbers, -, or . for the first character, or - or . for the last charac-ter.blankNetwork Setting > Initial Settings >Configuring the Printer's TCP/IP Network Settings With RemoteUI iPF6509706
