Setting Item Description, InstructionsSystemSetupKeep Paper Size Choose Off to give priority to margin settings. Thelarger value is used if the margin specified in the print-er driver does not match the margin in the printermenuTrimEdge Reload Specify whether to trim the leading edge of the cur-rently retracted roll when the roll is advanced. Cut theedge if you are concerned about any marks left on theroll when the roll is left in the retracted position.Specify On to have rolls cut when printing begins af-ter Sleep mode or when the power is restored. Select-ing Automatic will trim the edge when the roll hasbeen in the retracted position for two days or more.Rep.P.head Print Choose On to have the printer automatically executethe Advanced Adj. operations after you replace thePrinthead. (See "Automatic Adjustment to Straight-en Lines and Colors (Head Posi. Adj.).") →P.619Nozzle Check In Frequency, specify the timing for automatic checksof nozzle clogging. Choose Standard to have theprinter adjust the timing for checks based on the fre-quency of nozzle use. Choose 1 page to check onceper page.Select Warning > On to display warnings if the noz-zles clog during printing.Use RemoteUI Choosing Off prohibits access from RemoteUI. Set-tings can only be configured from the control panel.Reset PaprSetngs Restores settings that you have changed with MediaConfiguration Tool to the default values.Show Job Log Selecting Off prevents display of the log in Job Menu> Job Log. Additionally, the log is not printed if youchoose Job Menu > Print Job Log. Note that becausejob logs are not collected, the Status Monitor account-ing functions will not work correctly.Prep.MovePrinter Select this option when transferring the printer to an-other location. Follow the instructions displayed tocomplete the required procedure. (See "Preparing toTransfer the Printer.") →P.763Not displayed during a warning message that the re-maining Maintenance Cartridge capacity is low.Admin.MenuChange Password By setting a password, you can restrict menu displayand configuration as follows. You can input between 0and 9999999.Control Panel > Printer Menu >Menu Settings iPF6508684
