This processing sequence is called the Color imageRUNNER Enlargement Copy function.To use Color imageRUNNER Enlargement Copy, first complete these settings in the following order.1. Register a hot folder on your computer.Register a hot folder on your computer for storing scanned originals from the Color imageRUNNER and complete thesettings for enlargement copy. For details, see "Creating a New Hot Folder." →P.5222. Complete the scanning settings on the Color imageRUNNER.Configure the Color imageRUNNER to send scanned originals to the hot folder.After these settings are complete, you can print enlarged copies of scanned originals from the Color imageRUNNER.Completing the scanning settings on the Color imageRUNNER.Configure the Color imageRUNNER to send scanned originals to the hot folder. It is easy to send scanned originals to thehot folder if you assign the scanning settings and destination to a Favorites button on the Color imageRUNNER.For instructions on assigning scanning and sending settings to the Favorites button, refer to the Color imageRUNNER man-ual.Scanning the original and print an enlargementFollow the steps below to scan an original on the Color imageRUNNER for enlarged printing on the printer. For detailedinstructions, refer to the Color imageRUNNER manual.1. Load the original on the platen glass or document feeder of the Color imageRUNNER.2. Press Send to display the screen for transmission.3. Press Favorites, and then press the Favorites button assigned to the hot folder.4. Press Start on the control panel. If you scan originals on the platen glass, after scanning all originals, press Doneon the touch-panel display.Scanned originals are sent to the hot folder and automatically enlarged and printed following the conditions youspecified for the folder.Mac OS X Software > Color imageRUNNER Enlargement Copy >Printing Enlargements of Scanned Originals from a Color imageRUNNER iPF6504540
