Important• Borderless printing is only available with rolls.• Paper you can use for borderless printing is restricted to particular types of paper and rolls of particularwidths. For information on types of paper compatible with borderless printing, refer to the Paper Refer-ence Guide. (See "Types of Paper →P.568 ")• Paper incompatible with the printer's auto cut function can be printed without borders on the left andright sides only.• These features cannot be used in combination with borderless printing: special page layouts, centeringoriginals, and printing cut lines on rolls.• If Fit Paper Size or Print Image with Actual Size (Windows only) is selected when performing bor-derless printing, Rotate Page 90 degrees (Conserve Paper) cannot be selected.• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may beuneven at the edges. If you require higher image quality, specify No in Auto Cut in the printer driver. Inthis case, the paper can be printed without borders on the left and right sides only. After ejecting andcutting the printed document, use scissors to cut away the top and bottom edges.• By factory default, the ink drying time is disabled for all paper. When you are using paper that takeslonger for ink to adhere for borderless printing and the Cutter Unit touches printing surfaces that are notdry yet, it may damage the paper or the edge of the document that is cut, depending on frequency of use.In this case, follow these steps to change the ink drying time.• On the Main sheet of the printer driver, click Settings in Media Type.• Select the ink drying time in the Between Pages list of Drying Time.• Borderless Printing MethodChoose the method of borderless printing that suits the original, as desired.• Print Image with Actual SizePrints originals at actual size, without enlarging or reducing them. Originals must be prepared in a size that exceeds thedimensions of the paper by 3 mm (0.12 in) on each side.Note• Not all page sizes are available.• Even if you prepare originals of the same size as the paper size, the originals are automatically enlargedwhen you print borderlessly in combination with resizing originals to match the paper size. This mayaffect image quality. When image quality is most important, make the original 3 mm longer on eachside than the paper size so that the image can be printed at actual size in borderless printing.For instructions on borderless printing of photos and images at actual size, refer to the following topics, as appropriatefor your computer and operating system.Enhanced Printing Options > Printing at full size >Borderless Printing at Actual Size iPF650296
