This paper cannot be used as size is not supported.This paper cannot be used as size is not supported.Cause Corrective ActionPaper that is too large for the printer has been loa-ded.Lift the Release Lever and load paper of the correct size.(See "Paper Sizes.") ➔ P.332Paper that is too small for the printer has beenloaded.Lift the Release Lever and load paper of the correct size.(See "Paper Sizes.") ➔ P.332Paper has been loaded that is too small to printthe test pattern for printhead adjustment or nozzlechecking.Lift the Release Lever and load unused paper A4/Letter (vertical) or larger.More than one sheet may be required depending on the adjustment.Cannot print as selected. Another roll is in use.Cannot print as selected. Another roll is in use.Cause Corrective ActionA printed document remains in the Output Tray without being cut and aprint job was received that specifies the other roll.Press the OK button to stop printing.Cut the printed document.(See "Specifying the Cutting Method for Rolls.") ➔ P.360Load the other roll and resend the print job.(See "Loading and Printing on Rolls.") ➔ P.18Roll printing is selected.Roll printing is selected.Cause Corrective ActionYou have attempted to print on a roll,but no roll is loaded.Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button. Load the roll,and then print.(See "Attaching the Roll Holder to Rolls.") ➔ P.342(See "Loading Rolls in the Printer.") ➔ P.345Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.Roll printing is selected, but sheets are loaded.Roll printing is selected, but sheets are loaded.Cause Corrective ActionA print job for rolls was received when asheet is loaded.Follow these steps to load and print on a roll.1. Press ▲ or ▼ to select Eject Cut Sheet, press the OK button, and remove the sheet.(See "Removing Sheets.") ➔ P.3732. Load a new roll.(See "Loading Rolls in the Printer.") ➔ P.345The printer now starts printing the print job.Press ▲ or ▼ to select Stop Printing, and then press the OK button.Roll x is selected. (x is 1 (Upper) or 2 (Lower))Roll x is selected. (x is 1 (Upper) or 2 (Lower))Cause Corrective ActionThe indicated roll is specified for a print job sentfrom a computer, but that roll is not loaded.Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button.Load the roll, and then print.(See "Attaching the Roll Holder to Rolls.") ➔ P.342(See "Loading Rolls in the Printer.") ➔ P.345Press ▲ or ▼ and select Stop Printing or press the Stop button to stopprinting.iPF840 This paper cannot be used as size is not supported.User's GuideError Message Messages regarding paper641
