3 In the Paper Detailed Settings dialog box displayednext, select the desired settings values in C Be-tween Pages and D Between Scans in B DryingTime, and then click OK.(See "Paper Detailed Settings Dialog Box (MacOS).") ➔P.276Specifying the Cutting Method for RollsSpecifying the Cutting Method for RollsHow rolls are cut after ejection varies depending on printer settings.Cutting Method Printer Setting Driver SettingAutomatic The roll is automatically cut by the Cutter Unit fol-lowing printer driver settings.MediaMenu >Paper De-tails >(VariousTypes ofPaper) >CuttingModeAutomatic AutomaticCutting(See "Cut-ting RollPaper AfterPrint-ing.")➔ P.152YesEject (whenthe papersurface isbeingscratched /to wait forink to dry)Select this to move the cutter by key operation andcut paper. Although there are cases with Automat-ic in which the paper falls and the paper surface isscratched when the paper rubs the Output Stacker,you can avoid damaging the paper with this methodsince you can cut by holding the paper with yourhand so that the paper does not fall when cutting,Also, since you can cut while visually confirming thedrying of the ink, you can avoid ejecting paper be-fore the ink has dried.To cut the roll with the Cutter Unit, press the Cutbutton.Eject YesManual(when us-ing mediathat cannotbe cut withthe CutterUnit )Select this for paper that cannot be cut with theCutter Unit and for paper of which the leading edgecurls strongly and rubs the printhead.Cut each page from the roll using scissors. For con-tinuous printing (if you will cut each page later), se-lect Automatic Cutting > Yes or select Print CutGuideline.Manual No, Yes, PrintCut GuidelinePaper cut-ting (tohave theroll cut atyour speci-fied posi-tion)Choose this option if you want to cut pages bypressing Cutter Unit buttons for manual cutting afterprinting when Automatic Cutting > No is selectedor Print Cut Guideline is selected in the printerdriver.Otherwise choose this option if you want to cut theroll edge after loading a roll.Cut buttonpressedYes No, Print CutGuidelineSpecifying the Cutting Method for Rolls iPF840User's GuideHandling and Use of Paper Handling rolls360
