4 Press ▲ or ▼ to select Yes, and then press the OK button.After the roll paper is cut, it is rewound automatically.Cutting the Leading Edge of Roll Paper AutomaticallyCutting the Leading Edge of Roll Paper AutomaticallyIf the leading edge of the paper is cut crooked or is not cut straight when roll paper is loaded, it will not print correct-ly. If this happens, you can cut the leading edge of the paper straight when loading a paper roll by using Trim EdgeFirst in the Control Panel menu.Trim Edge First offers the following options.• AutomaticIf the leading edge of the paper is cut crooked and is not cut straight when loading roll paper, cut the leadingedge straight and eject the fragment of paper to prevent printing on the platen and soiling the printer.• On (Preset Len)The amount to cut from the leading edge of the paper varies depending on the media type, and is cut to aprescribed length. For more information on the prescribed length, see the leading edge precut length in thePaper Reference Guide. (See "Displaying the Paper Reference Guide.") ➔P.335• On(Input Length)The amount to cut from the leading edge of paper is specified in the control panel. The amount to cut from theleading edge can be specified in the range of lengths displayed in the control panel. The range of lengths dif-fers between each media type.Note• The amount to cut from the leading edge of paper cannot be set shorter than the length displayed in the con-trol panel.• ManualThe amount to cut from the leading edge of the paper can be adjusted by pressing the ▲ and ▼ buttons.After making the adjustment, you can cut the paper by pressing the Paper Cutting button and selecting "Cutpaper".After the paper has been cut, press "Finish paper set".Note• If you do not press "Finish paper set" after cutting the paper, you will not be able to print again.• OffThe edge is not cut and scraps are not removed.Follow these steps to change the Trim Edge First setting.1 On the Tab Selection screen of the Control Panel, press ◀ or ▶ toselect the Paper tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.Cutting the Leading Edge of Roll Paper Automatically iPF840User's GuideHandling and Use of Paper Handling rolls366
