Cutting Roll Paper After Printing (Mac OS)Cutting Roll Paper After Printing (Mac OS)This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how toprint a cut line for manual cutting.Note• The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the stepsbelow to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.1 Choose Page Setup from the application menu todisplay the Page Attributes dialog box.Note• Page Setup might not be displayed in the menu de-pending on the OS you are using and the applica-tion software.In this case, select Print from the menu in the appli-cation software, and configure the settings in the up-per part of the printer driver screen that is displayed.2 Select the printer in the B Format for list.3 Choose the original size in the C Paper Size list.4 Click F OK to close the dialog box.5 Choose Print in the application menu.6 Access the Page Setup pane.7 Select and click a roll paper in the A Paper Source list.Cutting Roll Paper After Printing (Mac OS) iPF840User's GuideEnhanced Printing Options Other useful settings154
