Other SettingsOther SettingsSpecifying Printer-Related Information ............................................................................................................ 488Configuring the Communication Mode Manually ............................................................................................. 489Email Notification When Printing is Finished or Errors Occur ........................................................................... 490Initializing the Network Settings ...................................................................................................................... 490Specifying Printer-Related InformationSpecifying Printer-Related InformationFollow the steps below to specify device information and security settings.1 Start the web browser and enter the following URL in the Location (or Address ) box to display the Remo-teUI page.http://printer IP address or name/Example: http://xxx.xxx.xxx.xxx/2 Select Administrator Mode and click Logon.Note• If a password has been set on the printer, enter the password.3 Click Information in the Device Manager menu at left to display the Information page.4 To display the relevant settings page, click Edit in the upper-right corner of Device Information or Securi-ty, depending on what information you want to specify.To change the administrator password, click the Change Password button in the Security group.5 Refer to the table of settings for device information and security as you complete these settings.Security setting items are displayed when you click the Change Password button in the Security group.Device Information SettingsItem Details Default SettingDevice Name Enter a device name.(0–32 characters)blankLocation Enter the location where the device is installed.(0–32 characters)blankAdministrator Enter the administrator's name.(0–32 characters)blankPhone Enter the administrator's contact information.(0–32 characters)blankComments(E-mail) Enter any comments regarding the administrator.(0–32 characters)blankSecurity SettingsItem Details Default SettingNew Password Enter the new password.(0-9999999)blankConfirm Enter the new password again to confirm it.(0-9999999)blank*1:On the Security settings screen, besides entering a password, you can specify other security-related information, suchas IP address-based SNMP or TCP usage restrictions, MAC address-based access restrictions, or IPP and FTP au-thentication settings.6 Click OK to activate the settings.Specifying Printer-Related Information iPF840User's GuideNetwork Setting Other Settings488
