Pausing PrintingPausing PrintingPausing PrintingPausing PrintingDuring printing, if you set Pause Print in the Control Panel menu to On, printing is stopped at that point and theprinter enters a state in which printing is paused. (See "Control Panel Display.") ➔P.428Printing from the job queue is not possible in this state.To restore normal operation after this state, set Pause Print to Off.Note• In the following cases, the status is cleared even if you do not set Pause Print to Off, and printing from the jobqueue resumes.• When paper is advanced• When you execute Chg. Paper Type in the Paper Menu1 During printing, on the Tab Selection screen of the Control Panel,press ◀ or ▶ to select the Job tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.2 Press the OK button.The Job Menu is displayed.3 Press ▲ or ▼ to select Pause Print, and then press the OK button.4 Press ▲ or ▼ to select On or Off, and then press the OK button.iPF840 Pausing PrintingUser's GuideBasic Printing Workflow Pausing Printing27
