3 In the Resume Printing dialog box, enter the quanti-ty to print and click OK.For details, refer to the imagePROGRAF Printmonitor help file.Deleting Saved JobsDeleting Saved JobsDelete saved print jobs stored on the printer's hard disk as follows.This operation is available from the Control Panel, in RemoteUI, imagePROGRAF Status Monitor, and image-PROGRAF Printmonitor.Using the Control Panel1 On the Tab Selection screen of the Control Panel, press ◀ or ▶ toselect the Job tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.2 Press the OK button.The Job Menu is displayed.3 Press ▲ or ▼ to select Stored Job, and then press the OK button.4 Press ▲ or ▼ to select the box number (in the range 00–29), and then press the OK button.Note• Enter a password if one has been set, and then press the OK button.5 Press ▲ or ▼ to select Job List, and then press the OK button.6 Press ▲ or ▼ to select the saved job, and then press the OK button.7 Press ▲ or ▼ to select Delete, and then press the OK button.8 Press ▲ or ▼ to select Yes, and then press the OK button.iPF840 Deleting Saved JobsUser's GuidePrint Job Management Basic Print Job Operations525
