• Cutting Roll Paper After Printing (Windows) ➔P.153• Cutting Roll Paper After Printing (Mac OS) ➔P.154Cutting Roll Paper After Printing (Windows)Cutting Roll Paper After Printing (Windows)This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how toprint a cut line for manual cutting.Note• The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the stepsbelow to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.1 Choose Print in the application menu.2 Select the printer in the dialog box, and then display the printer driver dialog box. (See "Accessing thePrinter Driver Dialog Box from Applications .") ➔P.1643 Click the Page Setup tab to display the Page Setupsheet.4 Select and click a roll paper in the L Paper Source list.5 Click N Roll Paper Options to display the Roll Paper Op-tions dialog box.6 To enable automatic cutting, click Yes in the A Automatic Cutting list. If you prefer to cut the paper lateryourself, click Print Cut Guideline.7 Click OK to close the Roll Paper Options dialog box.8 Confirm the print settings and print as desired.Note• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.161Roll paper will be automatically cut after printing.iPF840 Cutting Roll Paper After Printing (Windows)User's GuideEnhanced Printing Options Other useful settings153
