ManageR-emainRoll Barcodes Printer Operation After the Paper is FedOn Printed There is no need to specify the type and length of the paper.Not prin-tedA menu for selection of the paper type and length is automatically shown on the Display Screen.Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button.Note• For details on types of paper to select, see the Paper Reference Guide. (See "Displaying the Paper Ref-erence Guide.") ➔ User's Guide8 Holding it at the positions indicated, close the RollCover.Note• Cut the edge of the roll after the paper is advanced if it is soiled or if there are cuts from scissors or theblade after removing creased edges. (See "Specifying the Cutting Method for Rolls.") ➔ User's GuideRemoving the Roll from the PrinterRemoving the Roll from the PrinterRemove rolls from the printer as follows.Note• If you need to cut the roll, see "Specifying the Cutting Method for Rolls." ➔ User's Guide1 On the Tab Selection screen of the Control Panel, press ◀ or▶ to select the Paper tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.2 Press the OK button.The Paper Menu is displayed.3 Press ▲ or ▼ to select Eject Paper, and then press the OK button.Removing the Roll from the Printer iPF685 SeriesBasic GuideHandling Paper Handling rolls18
