Canon iPF685 Series Basic Manual

Also see for image Prograf iPF 685 Series: Setup guide User guide

Contents

Canon iPF685 Series Basic Manual Manual pdf 65 page image

7 When the processing is complete, "Completed! Turn PowerOff!!" is displayed. Press the Power button to turn the poweroff.Pack the printer1 Disconnect the power cord and interface cable.Important• Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off andtransfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, andfollow this procedure again.2 Tape down printer covers to secure them, in the re-verse order of tape removal during installation.3 Remove the Stand by reversing the installation procedure, when it was attached to the printer.4 Disassemble and repackage the Stand by following the installation procedure in reverse.5 Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in ashipping box.Reinstalling the PrinterReinstalling the PrinterThe basic workflow for reinstalling the printer is as follows.For detailed instructions, see the Setup Guide.iPF685 Series Reinstalling the PrinterBasic GuidePrinter Relocation Preparing to Transfer the Printer65