5 Holding the Roll Holder flange (a), guide the holderalong the Roll Loading Slots (b) on both ends,keeping the holder level as you load it in the RollHolder Slot.Caution• Do not force the Roll Holder into the printer with the right and left ends reversed. This may damage theprinter and Roll Holder.• Do not release the flanges until the holder is loaded in the Roll Holder Slot.• Be careful not to pinch your fingers between the Roll Loading Slots (b) and the Roll Holder shaft (c) whenloading rolls.6 Advance the roll to insert the leading edge in thePaper Feed Slot (a) until you hear a tone.Important• Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect theprinting quality. We recommend wearing clean cloth gloves when handling rolls to protect the printingsurface.• If the paper is wrinkled or warped, straighten it out before loading it.• Load paper straight so it is not fed askew.7 Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting andthe barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.") ➔ User's GuideManageR-emainRoll Barcodes Printer Operation After the Paper is FedOff Printed A menu for selection of the type of paper is automatically shown on the Display Screen.Press ▲ or ▼ to select the type of paper, and then press the OK button.Not prin-tedOn Printed The type and amount of paper left is automatically detected based on the barcode printed on the roll.iPF685 Series Loading Rolls in the PrinterBasic GuideHandling Paper Handling rolls17
