Canon iPF685 Series Basic Manual

Also see for image Prograf iPF 685 Series: Setup guide User guide

Contents

Canon iPF685 Series Basic Manual Manual pdf 93 page image

Cause Corrective ActionCut Speed is not configured correctly in theControl Panel menu.Change the Cut Speed setting in the Control Panel menu.(See "Menu Structure.") ➔ P.50During cutting, printed documents fall out atan angle.In the Control Panel menu, set Cutting Mode to Eject. Hold documents after print-ing, as they are cut.(See "Specifying the Cutting Method for Rolls.") ➔ User's GuidePaper is not cutPaper is not cutCause Corrective ActionIn the printer driver, No or Print Cut Guideline is specifiedin Automatic Cutting.Specify Yes in Automatic Cutting in the printer driver.(See "Page Setup Sheet (Windows).") ➔ User's Guide(See "Paper Detailed Settings Dialog Box (Mac OS).") ➔ User's GuideIn the Control Panel menu, Cutting Mode is set to Ejector Manual.If the Cutting Mode is Eject, press the Cut button to cut the paper.If the Cutting Mode is Manual, cut rolls with scissors or the like.(See "Specifying the Cutting Method for Rolls.") ➔ User's GuideDepression on the leading edge is leftDepression on the leading edge is leftCause Corrective ActionKeeping a roll in the printer for a long timewithout printing on it may leave a depres-sion on the leading edge.When printing quality is most important, we recommend setting TrimEdge Reload toOn or Automatic so that the paper edge is automatically cut before printing.(See "Menu Structure.") ➔ P.50The size of clear film cannot be detectedThe size of clear film cannot be detectedCause Corrective ActionThe Platen is soiled with ink or other substances. Open the Top Cover and clean the entire Platen.(See "Cleaning Inside the Top Cover.") ➔ P.41Roll Paper is Continuously EjectedRoll Paper is Continuously EjectedCause Corrective ActionAlthough sheets areselected as the papersource, a roll was ad-vanced.After roll ejection stops, follow these steps to reload the roll.1. Push the Release Lever back.2. Open the Roll Cover.3. Using both hands, rotate the Roll Holder toward the back to rewind the roll. At this time, ensure thatboth ends of the roll are rewound evenly.4. Pull the Release Lever forward.5. Load the roll. At this time, be sure to press the Load button and select "Load Roll Paper".(See "Loading Rolls in the Printer.") ➔ P.15iPF685 Series Paper is not cutBasic GuideTroubleshooting Problems Regarding Paper93