Canon iPF685 Series Basic Manual

Also see for image Prograf iPF 685 Series: Setup guide User guide

Contents

Canon iPF685 Series Basic Manual Manual pdf 118 page image

Paper not aligned with right guide.Paper not aligned with right guide.Cause Corrective ActionWhen paper was loaded, it was not aligned with the guide on the rightside.Follow these step to reload a sheet.1. Push the Release Lever back.2. Pull out the sheet.3. Pull the Release Lever forward.4. Reload the sheet, aligning it with the guide on the right.Cannot detect paprCannot detect paprCause Corrective ActionThe printer could not detect the paper. Reload the paper as follows.1. Remove the paper and press the OK button.2. Reload the paper.(See "Loading Sheets in the Printer.") ➔ P.21(See "Loading Rolls in the Printer.") ➔ P.15Leading edge detection error.Leading edge detection error.Cause Corrective ActionThe leading edge of the paper cannot be detected. Follow these step to reload a sheet.1. Push the Release Lever back.2. Reload the sheet straight, in the correct position.(See "Loading Sheets in the Printer.") ➔ P.21Paper cutting failed.Paper cutting failed.Cause Corrective ActionThere are sheets left onthe Ejection Guide.1. Push the Release Lever back and remove the paper.2. Load the paper.3. Pull the Release Lever forward.4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, pressthe OK button.Printing will resume, starting from the page on which the error occurred.(See "Loading Rolls in the Printer.") ➔ P.15There is a foreign objectby the Output Tray, ob-structing the Cutter Unit.1. Lift the Top Cover and remove the foreign object.2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, pressthe OK button.Printing will resume, starting from the page on which the error occurred.You are not using theprinter under the recom-mended environmentalconditions for the paper.Use the printer only where the recommended environmental conditions for the paper are met. Notethat various environmental conditions are recommended for various types of paper. For details on therecommended environmental conditions for paper, see Paper Reference Guide."(See "Displaying the Paper Reference Guide.") ➔ User's GuideYou are using paper thatis not compatible with au-tomatic cutting.1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the roll.(See "Specifying the Cutting Method for Rolls.") ➔ User's GuideFor information about paper that is compatible with automatic cutting, see the Paper ReferenceGuide.(See "Displaying the Paper Reference Guide.") ➔ User's Guide2. Push the Release Lever back and remove the paper.Paper not aligned with right guide. iPF685 SeriesBasic GuideError Message Messages regarding paper118