Canon iPF685 Series Basic Manual

Also see for image Prograf iPF 685 Series: Setup guide User guide

Contents

Canon iPF685 Series Basic Manual Manual pdf 113 page image

Cause Corrective ActionWhen Detect Mismatch in the Control Pan-el menu is set to Pause, the type of paperloaded does not match the type specified inthe printer driver.2. Replace the loaded paper with paper of the type and size you have specified inthe printer driver.(See "Loading and Printing on Rolls.") ➔ User's Guide(See "Loading and Printing on Sheets.") ➔ User's GuidePress ▲ or ▼ to select Print, and then press the OK button to resume printing.However, note that this error may cause paper jams and affect the printing quality.When Detect Mismatch in the Control Pan-el menu is set to Warning, the type of pa-per loaded does not match the type speci-fied in the printer driver.You can continue to print, but note that this error may cause paper jams or problemsin the printing results.The paper is too small.The paper is too small.Cause Corrective ActionWhen Detect Mismatch in the ControlPanel menu is set to Pause, paper small-er than the size specified in the printerdriver is loaded.Press ▲ or ▼ to select Print, and then press the OK button to resume printing.However, note that this error may cause paper jams and affect the printing quality.Adjust the paper size setting in the printer driver to match the size loaded in the printeras follows.1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.2. Change the paper size setting in the printer driver to the size loaded in the printerand try printing again.Replace the loaded paper with paper of a size that matches the size setting in theprinter driver as follows.1. Press ▲ or ▼ to select Change Paper, and then press the OK button to stop print-ing.2. Replace the loaded paper to match the settings in the printer driver and try printingagain.(See "Loading and Printing on Rolls.") ➔ User's Guide(See "Loading and Printing on Sheets.") ➔ User's GuideWhen Detect Mismatch in the ControlPanel menu is set to Warning, papersmaller than the size specified in the print-er driver is loaded.You can continue to print, but note that this error may cause problems in the printingresults.The paper is too small.The paper is too small."Replace paper with A4/LTR (vertical) or larger"Cause Corrective ActionThe loaded paper is too small. Replace the paper with paper of A4/Letter (vertical) size or larger as follows.1. Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper.(See "Removing Sheets.") ➔ P.232. Switch to paper A4/Letter (vertical) or larger.(See "Loading and Printing on Sheets.") ➔ User's GuideThe printer will resume printing.Press ▲ or ▼ to select Stop Printing, and then press the OK button."Replace roll with 10 in. wide or larger roll."Cause Corrective ActionThe loaded paper is too small. Replace the roll with a roll 10 inches in width or larger as follows.iPF685 Series The paper is too small.Basic GuideError Message Messages regarding paper113