Canon iPF685 Series Basic Manual

Also see for image Prograf iPF 685 Series: Setup guide User guide

Contents

Canon iPF685 Series Basic Manual Manual pdf 119 page image

Cause Corrective ActionIn other cases, the CutterUnit may be damaged.Contact your Canon dealer for assistance.End of paper feed.End of paper feed.Cause Corrective ActionAlthough an attempt was made to advance the paper manually, it reachedthe limit position that can be advanced.Canceling manual advancing.(See "Feeding Roll Paper Manually.") ➔ User's GuideRel lever is in wrong position.Rel lever is in wrong position.Cause Corrective ActionThe Release Lever is pushed back. Pull the Release Lever forward.Turn off the printer and wait a while before restoring power.Borderless printng not possible.Borderless printng not possible.Cause Corrective ActionThe print job received specifiesa type or width of paper that isnot compatible with borderlessprinting.Follow these steps to change the settings of the print job to enable borderless printing.1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.2. Make sure the correct printer driver for the printer is selected and try printing again.For information on types of paper compatible with borderless printing, refer to the Paper Ref-erence Guide.(See "Displaying the Paper Reference Guide.") ➔ User's Guide }Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing.The document will be printed with a border.The loaded paper is a size notcompatible with borderlessprinting.Press ▲ or ▼ to select Stop Printing, and then press the OK button.Replace the paper with paper compatible for borderless printing as follows.1. Press ▲ or ▼ to select Change Paper, and then press the OK button.(See "Removing the Roll from the Printer.") ➔ P.18(See "Removing the Roll Holder from Rolls.") ➔ User's Guide2. Replace the paper with paper compatible for borderless printing.(See "Attaching the Roll Holder to Rolls.") ➔ P.12(See "Loading Rolls in the Printer.") ➔ P.15The printer now starts printing the print job.For information on types of paper compatible with borderless printing, refer to the Paper Ref-erence Guide.(See "Displaying the Paper Reference Guide.") ➔ User's Guide }Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing.The document will be printed with a border.Because paper expands or con-tracts depending on the envi-ronment of use, it may becomenarrower or wider than the sup-ported width for borderlessprinting.Use each type of paper only where the recommended environmental conditions are met. For de-tails on environmental conditions for various paper, see the Paper Reference Guide.(See "Displaying the Paper Reference Guide.") ➔ User's GuideiPF685 Series End of paper feed.Basic GuideError Message Messages regarding paper119