Software InstallationSoftware InstallationInstalling the Printer Driver (Windows)Installing the Printer Driver (Windows)Installing the SoftwareInstalling the SoftwareThe basic instructions for installing the software are as follows.For detailed instructions, see the Setup Guide.Supported connection methodsThe printer driver works over USB or network (TCP/IP) connections.The driver installation procedure varies depending on the type of connection.Follow these steps to install the software.Installing the Software (Windows)Important• When setting up a USB connection, connect the USB cable during printer driver installation following the instruc-tions displayed.If you accidentally connect the USB cable first, the printer driver may not be installed correctly.• When the printer is connected to a network (via TCP/IP), the printer's IP address may be changed if you reinstallthe printer. In this case, be sure to reconfigure the printer's IP address.1 Turn the computer on.When setting up a TCP/IP (network) connection, after making sure the printer is on, connect the LAN cableto the Ethernet port on the left side of the printer and to your network hub port.2 Insert the provided User Software CD-ROM for theappropriate operating system in the CD-ROM drive.3 Follow the instructions displayed to complete instal-lation.iPF685 Series Installing the SoftwareBasic GuideSoftware Installation Installing the Printer Driver (Windows)69
