Canon iPF685 Series Basic Manual

Also see for image Prograf iPF 685 Series: Setup guide User guide

Contents

Canon iPF685 Series Basic Manual Manual pdf 50 page image

Menu StructureMenu StructureThe menu structure is shown categorized by tab. The * on the right side of an item indicates the default value.The printer menu is classified into regular menu items available when no print job is in progress and menu duringprinting items only available while printing is in progress. see "Printer Menu Operations." ➔ User's GuideRegular menu Menu during printingPaper Menu Not displayedInk Menu The same Ink Menu as normal is displayed.Job Menu The same Job Menu as normal is displayed.Set./Adj. Menu A limited Set./Adj. Menu containing the following items is displayed.• Adj. Fine Feed(*1)• Printer Info*1: Only displayed in the menu during printing. Not displayed in the regular menu.For instructions on menu operations, see "Menu Operations." ➔P.47For details on menu items, see "Menu Settings." ➔ User's GuidePaper MenuThe Paper Menu is not displayed during printing.First Level Second Level Third Level Fourth Level Fifth LevelLoad Paper Roll Paper | Cut SheetEject PaperChg. Paper Type(*1) Roll Paper (The paper type is displayed here.) (*1)Cut Sheet (The paper type is displayed here.) (*1)Chg. Paper Size Sheet Size (The size of paper is displayed here.) (*2)CustomPaperSize (Set the length and width)Roll Length(*3) (Set the length)Roll Width(*4) (Set the width)ManageRemainRoll Off* | OnPaper Details (The paper type isdisplayed here.) (*1)Head Height Automatic* | Highest | High | Standard | Low |Lowest | Super LowSkew Check Lv. High Accuracy | Standard* | Loose | OffCutting Mode(*6) Automatic | Eject | ManualCut Speed Fast | Standard | SlowTrim Edge First Automatic | Off | On (Preset Len) | On(InputLength) | ManualCutDustReduct. Off | OnVacuumStrngth Automatic* | Strongest | Strong | Standard |Weak | WeakestScan Wait Time Dry time Off* | 1 sec. | 3 sec. |5 sec. | 7 sec. | 9sec.Area(*5) Entire area* | Lead-ing edgeRoll DryingTime Off | 30 sec. | 1 min. | 3 min. | 5 min. | 10 min. |30 min. | 60 min.NearEnd RollMrgn 3mm | 20mmNearEnd Sht Mrgn 3mm | 20mmBordlessOversize Standard* | LittleWidth Detection Off | On*Return DefaultsMenu Structure iPF685 SeriesBasic GuidePrinter Parts Operations and Display Screen50